In 1814, amidst the backdrop of the War of 1812, the United States experienced moments of cultural significance and technological innovation that would leave a lasting impact on the nation.
One of the most iconic events of this year was Francis Scott Key penning ""Defence of Fort M'Henry,"" which would later become known as ""The Star-Spangled Banner,"" America’s national anthem. Inspired by the sight of the American flag triumphantly waving after the British bombardment of Fort McHenry, Key’s words captured the resilience and spirit of a young nation. Although initially written in 1814, the anthem continued to resonate, eventually being adopted as the national anthem in 1931, symbolizing American identity and patriotism.
While 1814 did not see the launch of the USS Fulton, the planning and design phase of this first steam-powered warship underscored a period of rapid technological advancement in naval architecture. This innovation foreshadowed the transformative impact steam power would have on maritime travel and military strategy, showcasing America's growing industrial capabilities and ingenuity.
Moreover, the year was marked by developments that would significantly influence American society and its urban landscapes. Though the exact timing of Rembrandt Peale's introduction of gas lighting to his museum in Baltimore and the founding of the Philadelphia Savings Fund Society occurred slightly later, the period was ripe with the seeds of innovation that would enhance public life and financial security for Americans.
These advancements reflected a nation in the midst of change, eager to embrace new technologies and ideas that promised progress and prosperity.
Capped Bust (1807-1812)
The early years of the United States Mint were fraught with problems: The equipment was crude, serviceable die steel was difficult to obtain, and until 1816, men and horses, not steam, supplied power to operate the machinery. But one of the most serious problems facing the new enterprise was a lack of experienced personnel, particularly in the area of design and engraving.
When the Mint began operations after the Coinage Act of 1792, employing suitable officers and workmen became one of the first priorities. As early as 1790, Secretary of State Thomas Jefferson (then the Cabinet officer in charge of the Mint) had been attempting to recruit qualified artisans from European cities where minting methods were state of the art. Jefferson had attended an exhibition at the Paris Mint in 1786, where he observed the operation of an improved coining press and was quite impressed with the machine and its inventor, French engraver Jean Pierre Droz. Droz’s methods were at the cutting edge of late 18th-century technology, and Jefferson was determined to retain his services for the proposed United States Mint. After some initial correspondence in 1786-87, the matter was tabled, as Droz apparently needed immediate employment and the Mint’s opening was still several years away. In 1790, negotiations with Droz were resumed and initially he accepted Jefferson’s offer, but later he declined, citing personal reasons.
As the new Mint facility in Philadelphia began to take shape, a talented engraver was still to be found. Coiners Henry Voight and Adam Eckfeldt assisted in the preparation of the first dies, but it was not until August 1793 that the artist Joseph Wright was appointed as engraver. Unfortunately, Wright died a few weeks later from yellow fever, in the annual epidemic that struck Philadelphia in the summer months. He was succeeded by Robert Scot, an English watchmaker and banknote engraver of some repute. Scot’s talents as a die engraver, however, were marginal at best. Many of his early coinage designs received widespread criticism, putting him on the defensive from the very beginning. Apparently fearing competition, he thwarted every effort by Mint Director Henry DeSaussere to engage an assistant engraver. When John Smith Gardner was finally appointed to that position at the end of 1794, he lasted only 16 months, probably due to Scot’s jealousy and harassing tactics. For years, Scot’s authority and position would go unchallenged, and his designs continued to reflect his limited skills. Probably his best work is his 1795 design for the first half eagle, with its Draped Bust portrait of Liberty and its small eagle on the reverse. The small eagle gave way to the heraldic eagle in 1798, but by the turn of the century, Scot’s failing eyesight increasingly limited his usefulness as an engraver.
During this era, thousands of immigrants began to arrive on the shores of the United States, including many refugees of the Napoleonic Wars. One of these emigres was John Reich, a German engraver who sold himself into indentured servitude in return for passage to America. By 1801, his skills were renowned in Philadelphia, even to President Thomas Jefferson, who recommended to Mint Director Elias Boudinot that Reich be employed. Boudinot complied, but apparently in deference to the excessively territorial Scot, Reich was not allowed to design coins but was assigned other miscellaneous tasks.
Scot was 62 in 1807 when the new mint director, Robert Patterson, implored Jefferson for permission to formally hire Reich. By this time Reich was so disgusted with doing menial tasks at the Mint and enduring Scot’s jealousy that he was ready to return to Europe. Patterson was not about to lose Reich’s services, and offered him the permanent position of assistant engraver at a salary of only $600 per year—half of the $1200 Scot received. Patterson immediately assigned Reich to revamp all the coinage designs. He began with the half dollar and half eagle, the two “workhorses” of commerce in that era, preferred by banks for international payments and reserves.
The Capped Bust motif Reich created for the 1807 half eagle features a buxom Miss Liberty facing left, flanked by seven stars to the left and six to the right. She is wearing a cloth cap inscribed LIBERTY, with curly hair falling out from the edge of her cap down to her shoulder. Reich’s Liberty has a distinctly European look, completely different from any previous depiction. When the coins entered circulation, newspapers of the day sardonically reported that Reich’s rendition was actually modeled after “the artist’s fat mistress.” Although the designer’s initials were not on the coin, almost all of Reich’s obverses have a characteristic notched point on the lowest star on the right—as his “signature.” On the half eagles, the notch faces the coin’s border. His reverse design depicts an eagle with outstretched wings, perched on a palm branch and holding three arrows in its claws. The motto E PLURIBUS UNUM appears on a ribbon above the eagle, and the inscriptions UNITED STATES OF AMERICA and 5D. surround the central design. One of Reich’s innovations was to place the denomination on gold and silver coins. Except for the copper coins and the 1796-97 half dollars, earlier designs had no indication of value, commonly passing by weight and fineness.
The Philadelphia Mint struck only 399,013 half eagles of this type between 1807 and 1812, and many were melted in later years, suffering the same fate as most U.S. gold minted before 1834. Possibly 1% of the mintage survived, mostly as curiosities, along with a few examples saved by early numismatic pioneers. Although there are some very scarce varieties such as 1808/7 and the 1810 small or large dates with small 5, these are usually only of interest to the dedicated specialist. Complete date sets are within the reach of many collectors, although the design is generally collected as a “type.”
No dates in the series are very rare, and most specimens are found in grades from Extremely Fine to About Uncirculated. Mint State pieces are regularly available, and some gems occasionally appear—usually the 1807, 1809/8, 1810 or 1812 issues, the latter two dates surfacing in old hoards. In the past, this series was a target of counterfeiters and many dangerous pieces still exist: Any questionable specimens should be authenticated. Wear first shows on Liberty’s hair and cap, and on the eagle’s wing tips, neck and claws.
In 1813, Reich eliminated the bosom and drapery of Liberty and rearranged the stars, creating the Capped Head design. He quit in disgust in 1817, never receiving a raise or promotion in ten years. His design, however, would last much longer than his tenure at the Mint, appearing on the half eagle until 1834. In 1818, Scot remodeled Reich’s Capped Head half eagle, fashioning an almost identical, but cruder rendition of the original. Scot would remain in the position of Chief Engraver until his death in 1823.
Capped Head (1813-1834)
Ever since the 16th-century landings of Cortez in Mexico and the Pizarro Brothers in Peru, Central and South America have been continuously drained of precious metals. After the turn of the 19th-century, enormous new discoveries of silver on both continents fueled marked increases in mining and exportation and quickly lowered the worldwide price of silver in relation to gold. Unfortunately, the bimetallic standard adopted in the United States under the Coinage Act of 1792 established a 15:1 ratio between the metals, and by 1813, the ratio in Europe was 16:1 or more. All circulating U.S. gold coins became worth more than their face value in silver, and speculators and bullion dealers quickly caught on. Fifteen ounces of silver would buy one ounce of gold in the U.S., but that ounce of gold would bring sixteen ounces of silver in Paris or London, and the cycle could be continued ad infinitum, or at least until U.S. gold coins were no longer available. And that is precisely what happened.
By 1813, the half eagle was the only U.S. gold coin being produced. Eagle coinage ceased in 1804 and quarter eagles hadn’t been minted since 1808. What little gold found its way to the Mint usually came from banks, and bankers generally preferred their bullion coined into half eagles. Although the “fives” were primarily used as reserves and for international payments, eventually the vast majority found their way into the melting pot.
The Capped Head half eagle series, minted from 1813 to 1834, suffered the most destruction from these melts. Made during the period when widespread melting took place, much of the mintage never saw circulation and commonly went straight from the Mint into bullion dealers’ hands. Some forty-thousand pieces of “recent mintage” were destroyed in a single Paris melt in 1831. The small quantities that survived the melts before 1834 were decimated by the Mint’s later recoinage of the old-tenor pieces.
Making its debut in 1813, John Reich’s Capped Head design for the half eagle was copied by Chief Engraver Robert Scot in 1818 and extensively reworked by William Kneass in 1829. Reich modified his earlier Capped Bust design by eliminating the bosom and drapery of Liberty, leaving a large head as the central device, surrounded by thirteen stars with the date below. The reverse, only slightly altered from his 1807 design, depicts an eagle with widespread wings, clutching an olive branch and arrows. Surrounding the eagle are the inscriptions UNITED STATES OF AMERICA and 5 D., with the motto E PLURIBUS UNUM above the eagle’s head. While Scot’s 1818 revision was a crude copy of Reich’s engraving, Kneass’ 1829 modification was a distinct change. Diameters were reduced from 25 to 22.5 millimeters, the portrait appeared in higher relief, and a beaded border replaced the denticles of the previous coin.
When discussing this series, the word “rarity” loses its meaning. Although the Philadelphia Mint produced 1,385,612 business strikes and approximately 150 proofs over a 22 year period, there are no common dates. The 1813 is most often encountered, with many of the several hundred survivors probably saved as first-year-of-issue souvenirs. Beginning a list of rarities unique in U. S. coinage is the 1814, with only a few dozen pieces known. The following year produced one of numismatics’ most celebrated coins, the low-mintage 1815, until this century considered the rarest date in the series. Only 12 pieces survive.
The 1818 and 1820 issues are occasionally available, with the latter date appearing more frequently. Coins of 1819 and 1821 are much more elusive. The 5D/50 variety of 1819, with only seven examples known, is rarer than the 1815 issue but has never achieved equal fame. Next is the legendary 1822 half eagle, perhaps the greatest rarity of all U.S. coins and one of the most famous. Only three specimens exist today, with two permanently impounded in the Smithsonian Institution. When this coin appeared at public auction in 1982, it realized a then-astounding $687,500 in the famed “Eliasberg Sale.”
It’s believed that 40-50 examples exist dated 1823, making it one of the more “common” dates of this type. For 1824, only 20 or so pieces are known. In 1825, there were two overdates struck: 1825/4 Uneven Date with perhaps 25-30 examples extant; and 1825/4 Even Date, another icon of rarity: only two pieces exist. Both 1825/4 Evev Date half eagles are in private collections, with the second example unknown until 1970, when it was found in a Michigan bank vault as part of the N. M. Kaufman collection. Following this legendary coin are a string of elusive to impossible issues including 1826, 1827, 1828 and 1828/7, with survivors ranging from fewer than six pieces (1828/7) to as many as two to three dozen (1826). The final year of the large diameter coins, 1829, is about equal to 1828/7 in rarity, trailing only the 1822 and 1825/4 pieces.
In 1829, the transition was made to striking half eagles with a close collar, essentially a steel ring with vertical grooves inside. This innovation imparted a reeded edge to the finished coin and allowed smaller, standardized diameters. The new reduced size coins debuted with another landmark rarity, the 1829, an issue with perhaps 10 survivors in existence today. Two varieties followed in 1830 and 1831, with either large or small 5D, and approximately 75 examples are known of each date. A few dozen pieces exist for each year from 1832 through 1834, but only six specimens can be traced of the 1832 variety with twelve stars, making it rarer than the more ballyhooed 1815 and 1819 coins. Seeing little circulation, the majority of surviving coins are in grades ranging from XF to mint-state. Wear on this design first begins to show on Liberty’s cap and hair, and on the eagle’s wings and claws. Counterfeits are occasionally seen, including some crude 19th-century replicas of key dates.
With so many great rarities in the series, Capped Head half eagles are generally regarded as a type coin and even then are usually pursued only by advanced collectors. With the exception of Louis Eliasberg’s holdings, almost all the great collections formed of this series were completed or at least started in the 19th century, most notably those of Stickney, Jenks, Steigerwalt, Dunham and Garrett.
In the summer of 1834, Congress passed legislation lowering both the weight and fineness of U. S. gold coins. More than a generation had passed since half eagles were seen in commerce, and the new, lighter weight Classic Head coins were readily accepted and widely circulated. Continuing melts of the old tenor pieces made Capped Head half eagles the rarest series of Federal coinage, and today even a single example is often the highlight of many collections.
Coin Descriptions Provided by Numismatic Guaranty Corporation (NGC)
